Zyxel NR7101 5G OUTDOOR LTE MODEM ROUTER

Product Information

This article will give you information about our mobile routers working in the Nebula Cloud. Please take advantage of a workplace that is always networked and operational with our 5G/LTE routers. Also, this solution can extend corporate networks to support uninterrupted connectivity in areas that a traditional Internet network cannot reach. add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x8d181bd8, ep_ctx 0xbbc0d0a0, sch_ep 0x8d249880 add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 6, mult 0, ep 0x8d1fedac, ep_ctx 0xbbc0d3c0, sch_ep 0x8d29ab80

Through the LTE radio interface, the NR7101 supports TR-069, remote GUI and FTP to be fully configurable. Firmware Over-The-Air (FOTA) support enables remote firmware upgrades and troubleshooting, through events triggered by the operators. Environmental durability Please press Enter to activate this console. **** json_util.c line 174, json_object_to_file_ext() : write /data/zcfg_config.json to flash successfully

The Zyxel NR7101 is equipped with a flexible wall or pole mounting kit, integrated IEEE 802.3at Power over Ethernet (PoE) support and dedicated WiFi AP with mobile apps content graphics for eNB/gNB alignment. The NR7101 is also interoperable with both Standalone (SA) and Non-Standalone (NSA) deployments. Remote management and upgrade In the above example, we have a WAN IP of 10.204.58.202 and a public IP of 81.x.126.128 which means that we have a Grade Carrier NAT and we cannot access the device from the outside (from WAN) add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x8d181cac, ep_ctx 0xbbc0d140, sch_ep 0x8d249400 The Zyxel NR7101 Outdoor WiFi 6 5G NR Router supports the latest 5G NR technology whilst at the same time retaining full compatibility with 4G/3G networks. Key Features

Note: Not every firmware may work in every country. You can refer to the "digits", i.e. "AAYE", if your current firmware on the device matches this article to install a new one. It could also happen that you already have a newer firmware on your device as available within this article.add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 2, mult 0, ep 0x8d1fedd8, ep_ctx 0xbbc0d3e0, sch_ep 0x8d29a900