ADAM Audio T10S Subwoofer for recording, mixing and mastering, Studio Quality Sound

Product Information

My challenge with the TV7s was the low end wasn't quite enough to keep up with trailers, particularly Sci-Fi and Crime Dramas. The control panel gives access to the crossover frequency three-way slide switch, a polarity invert switch, and a volume knob with 0dB marked just past the mid-way position. Reddit and its partners use cookies and similar technologies to provide you with a better experience. Equipped with a 130-watt Class D amplifier, the T10S’ frequency response of 32 Hz to 120 Hz is tailored to extend the bass response of ADAM’s successful T Series studio monitor speakers. Ideally, I would love to be in a larger space where I could place midfields and a sub some distance away - this would allow the bass frequencies the space to develop and sound more natural, or so I hope.

I am on the lookout for a new subwoofer for my simple home studio, and i am trying to figure out something basic. The options at the rear of the subwoofer allow for varied adjustments which compensate for room acoustics or they offer more control for satellites attached.Regardless of what you pair the T10s subwoofer with, you should expect a well-balanced sound that you can trust on any system. Equipped with a down-firing 10" woofer and a 130 W Class-D amplifier, the T10S' frequency response ranges from 28 Hz to 120 Hz and offers an impressive max. An internal adjustable two-channel crossover allows calibration of the bass signal and provides optimal performance of the total system. Tipping the cabinet on its side shows the fully exposed driver mounted in the centre of the cabinet's bottom panel. The T10S Subwoofer takes into account the specific characteristics of the T5V and T7V studio monitors.

The AMT tweeters was proof what the high end should sound like, detailed and without fatigue after long listening. Some say that the speakers are the best monitors they have ever owned, and that the Adam tweeters are clearly superior. Just the right amount of oomph to add to my Yamaha HS7's; standby feature is useful, albeit a bit annoying at times as you have to wait 2-3 seconds for it to power up when it "hears" a signal coming through.The Adam Audio T10S Active Subwoofer is a powerful yet compact active subwoofer, designed to extend the bass response of any nearfield studio monitor. Outside of our operating hours licences will take longer but will be delivered as soon as possible on the next business day.

I'm happy to say that at normal listening levels the sub seemed to be barely ticking over, so it has plenty of headroom on tap for those brief 'turn it up' moments. Incorporating a 130 watt Class D amplifier, the subwoofer features an adjustable internal two channel crossover which gives calibration of bass frequencies and provides optimised performance for a total system of Adam audio T-series monitors.

ADAM's familiar 'Stealth' contours adorn the front edges of the cabinet, and a small green LED above the ADAM Audio logo shows when the speaker is powered up. You have the option of receiving a full refund / exchange within 14 days, or, exchange / credit only within 30 days. One technique is to stand the sub where you normally sit to mix, play some music with a busy bass line, then listen along the front wall, close to the floor, to see where the bass sounds the most even. The Adam Audio T10S is a sleek, powerful 10" active studio subwoofer, designed to enhance and improve any studio monitoring setup.

This is particularly useful, for example, when you work in "annoying" hours, with very low frequencies that do not represent a priority and you want to minimize the disturbance for the neighbors and the inhabitants of the floor below. There is enough bass despite 5 inch woofers for nearly all styles and genres you might work with, and the filters and sound shaping options work a treat for tuning the T5v's to your space. Equipped with a down-firing 10“ woofer and a 130 W Class-D amplifier, the T10S' frequency response ranges from 28 Hz to 120 Hz and offers an impressive max. It's in a sleep mode when no signal is sent to it for some time, and "wakes up" when receiving signal.

This sub beautifully compliments my Adam T5Vs, they sound incredible together, and one of my close friends who paired this sub with the T7Vs also loves his. This site or third-party tools used by this make use of cookies necessary for its operation and useful for the purposes described in Cookies Policy. I high-passed the monitors at 80Hz, which freed them up and noticeably increased their clarity in the midrange. Performance, connectivity and features of the T10S subwoofer are designed to complement both ADAM Audio's T5V and the T7V near field monitors, though it is just as capable at delivering superb results when used with other studio monitors such as the Adam A7X.