AquaHouse DI Car Wash water filter, Pure water for Spot Free Rinse Car Valeting & Window Cleaning

Product Information

A quick rinse with the hose through the race glaze filter and you can towel dry the car at your own leisure. People annoyed by water spots may be wary to wash their cards with hard water, as they've seen the havoc it reeks on household appliances.

We’ve all had to swiftly run round our cars to dry them before water spots form, which are very hard to remove and can badly affect paintwork.The media will produce up to 700L of water before it needs replacing (depending on local water hardness) and a final rinse usually uses around 10 litres of water. It is these minerals that cause spotting on the car once washed and while the spots that occur with softened water are generally paler and not as noticeable as with hard water, they still occur.

Carbon filters that remove chlorine (or chloramines) should be replaced after 18-24 months of continual use. i get the point of it all if the car is a garage queen/show car/little used toy, but for a daily workhorse? The quality of your water that is being utilized in the washing process has a significant impact on the longevity of the washing equipment as well as the efficiency of soaps, detergents, and chemicals. many people have to wash the car then take it out down the road 10 minutes later by which time its probably raining! With “minimum salting” of 6 lbs per cu ft, each regeneration will consume approximately 30 lbs of salt.The best way to achieve long contact time is to have a good amount of resin in relation to the flow rate of the water.

What impressed me even more was that the surfaces were hot and drying quickly as I was washing, leaving the usual unsightly marks.

Car washing spots occur when the water evaporates and any minerals in the water are left behind as residue. The backwashing process (where the inlet and outlet connections are swapped over and water passed upwards through the filter) moves the resin bed around and re-classifies some of the un-used resin back to the centre of the filter.